training race in Okayama on Oct 24, 2018

Moderator: rFactor 2 | GT Pro Admin

Antworten
Benutzeravatar
Carsten Schulze
rFactor 2 | GT Pro Admin
Beiträge: 764

training race in Okayama on Oct 24, 2018

Beitrag von Carsten Schulze » 16. Oktober 2018, 22:40:30

Bild


track map
Bild


data and server settings
training: 07:00 pm*
qualifying: 08:00 pm*
warm-up: 08:20 pm*
race start: 08:25 pm*
race duration: 75 mins
*local time in Germany

join period: training & warm-up
ingame - race start time: 02:00 pm
flags: black only
fuel consumption: normal
tire wear: normal
failures: normal
view: freely selectable
auto pilot: no
damage multiplier: 70%
driving aids: auto shift, auto clutch, traction control + ABS (via setup)
setup: freely selectable
real road preset: light or medium rubbered / natural progressing
start: rolling (standing start into the formation lap behind the pace car, flying start into the race)
time multiplier: normal
driver swap: not allowed
rejoin: allowed (for details see regulations C/§2/(2))
additional ballast: top8 - based on the result of previous championship race
pit speed limit: 60 km/h


server: ! SR-U.net GT Pro Series
password: same as the one for the training server



specials and annotations
- see 2nd post below




live timing / hotlaps
live timing
hotlaps


weather forecast
Weather Athens, Georgia USA
Weather station Boulevard Neighborhood Station
Weather radar Athens, Georgia USA


REPLAYS

RACE STATISTICS

Benutzeravatar
Carsten Schulze
rFactor 2 | GT Pro Admin
Beiträge: 764

Re: training race in Okayama on Oct 24, 2018

Beitrag von Carsten Schulze » 16. Oktober 2018, 22:46:45

specials and annotations: Okayama

Deviating from the usual regulations, in Okayama it does matter how you enter the pits.
You have to enter the pits driving between the yellow pit entry lines - latest position: at the white line which the Ferrari is crossing in the picture (see green arrow / left part of picture).
Same as "leaving the track" regulation in qualifying, at least one front tire has to stay within the yellow lines or stay in contact with the yellow line (right part of picture).

Bild

Benutzeravatar
Carsten Schulze
rFactor 2 | GT Pro Admin
Beiträge: 764

Re: training race in Okayama on Oct 24, 2018

Beitrag von Carsten Schulze » 24. Oktober 2018, 18:46:49

Race server is online.

Benutzeravatar
Kim Strohmann
Rookie
Beiträge: 79
Wohnort: Westerland / Sylt

Re: training race in Okayama on Oct 24, 2018

Beitrag von Kim Strohmann » 24. Oktober 2018, 21:45:24

After 11700 hours, my hdd decided to slowly die :(

While loading rF2 the read rate was maxed out at 1,4MB/s... Most of the time it was at a amazing rate of 0,04MB/s... yes...
After I finally joined the race session, obviously not in time, the game runed fine, at least as spectator. No lags, no stuttering, just fine performance...

Well, new hdd is ordered...
Dateianhänge
gone.png
gone.png (180.67 KiB) 460 mal betrachtet
Bild

Benutzeravatar
Carsten Schulze
rFactor 2 | GT Pro Admin
Beiträge: 764

Re: training race in Okayama on Oct 24, 2018

Beitrag von Carsten Schulze » 24. Oktober 2018, 22:08:20

replays and race statistics added to 1st post

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste